| Setting up RAS is made pretty easy by NT's new look and feel.
This page goes into how to set it up for use with us here at
PRIMUS.
Let's assume that you have no RAS installed at all. If you
have already installed RAS then you might want to check your
settings against the ones here if it isn't working properly.
1.) Start by clicking on the Dial-up Networking icon.
 
2.) If Dial up networking isn't installed you will see this
window (at right) asking you to install it. Go ahead and click
install to start the installation.
(Don't forget -- You'll need your Windows NT 4.0 install
disks handy to do this).
Now you need the installation information. You'll
find it here.
Back to Windows
NT support |
